Skip to content

Kitchen

Dishwasher repairs in Gauteng

Standing water in the bottom, dishes coming out dirty, or a puddle at the door? We repair dishwashers at your home across Gauteng, find the fault first and explain the repair before any work starts.

Illustration of an open dishwasher with cups on the top rack and plates below

Common faults

What is it doing?

Find the symptom that matches yours. Each one points to a different set of parts, which is why we test before we name a repair.

  • Not draining

    Dirty water left in the base is usually a blocked filter, a kinked drain hose or something stuck in the drain pump. We clear the blockages first and test the pump if they are clean.

  • Dishes not clean

    Gritty glasses and food left on plates can come from blocked spray arms, a weak wash pump or water that never heats up. We check all three, because each one needs a different fix.

  • Leaking at the door

    Water on the floor in front of the machine often comes from a worn door seal, a loose spray arm or too much foam. Water under the machine is a different leak, usually from a hose or the pump.

  • Not filling

    If you hear the dishwasher humming but no water comes in, the inlet valve, the inlet hose or the tap that feeds it may be the problem. We check the water supply first.

  • Dishes still wet

    Wet dishes at the end of a cycle can come down to rinse aid, a heating fault or a drying fan that has stopped on models that use one. We tell you which it is before suggesting a repair.

  • Will not start

    Lights that come on but no wash often means the door latch is not registering as closed. If nothing lights up at all, we test the power at the machine and the controls.

The visit

How the repair works

  1. Tell us the fault

    Let us know if there is water in the base, dirty dishes, a leak or no power. A photo of the model sticker on the edge of the door helps us prepare.

  2. On site checks

    We look at the filter, spray arms, hoses and door seal, and run a short programme to watch the fault happen.

  3. A clear explanation

    We explain what has failed and what the repair involves, and wait for your go ahead before starting.

  4. A tested wash

    Once it is repaired, we run the dishwasher to check that it fills, heats, washes and drains properly.

Freestanding and built in dishwashers

We repair freestanding dishwashers and built in models that sit behind a kitchen cabinet door. A built in machine has to slide out so we can reach the hoses and the base, and we fit it neatly back in place when we are done.

Slimline and full size machines fail in much the same ways. Tell us which you have and the technician will come prepared.

Small habits that prevent big faults

Most draining and cleaning problems start with food and grease building up in the filter. Scraping plates before loading and rinsing the filter every week or two keeps a lot of these faults away.

If your water is hard, limescale can build up on the heater and spray arms and stop the machine heating properly. Dishwasher salt and rinse aid, where your machine uses them, really do help.

When the problem is the connection

Sometimes the dishwasher is fine and the fault is in the tap, the inlet hose or the drain under the sink. We can sort out the water connections that belong to the dishwasher on the same visit, so you do not need someone else for that part.

Questions

People also ask

Why is there water left in my dishwasher?

Most often the filter or drain hose is blocked, or something small like a piece of glass or a bottle cap is stuck in the drain pump. We check the simple causes first.

Why are my dishes coming out dirty?

Blocked spray arm holes, a clogged filter, overloading and a weak wash pump are the usual causes. If the water is not getting hot, the heater may have failed too.

Can I clean the filter myself?

Yes. On most machines the filter twists out of the base. Rinse it under the tap and lock it firmly back in place. If that does not fix the fault, give us a call.

Do you repair built in dishwashers?

Yes. We slide the machine out carefully to reach the hoses and base, then fit it back in place once the repair is done.

Is it worth repairing an older dishwasher?

Often it is. Pumps, seals, valves and heaters can usually be replaced. If the repair does not make sense for the age of the machine, we will tell you honestly.

Related

You might also need

  • MainTech technician repairing a front loader washing machine

    Washing machines

    Front and top loaders that will not drain, spin, start or stop leaking.

    See common faults
  • Technician working on a water pipe fitting

    Appliance water connections

    Water and drain connections for washing machines, dishwashers and ice makers.

    See common faults
  • A fridge, washing machine and small kitchen appliances grouped together

    All home appliances

    Fridges, washers, dryers, dishwashers and stoves repaired at your home.

    See common faults
See all services

Areas

Dishwashers across Gauteng

We visit homes and businesses in these areas and the suburbs around them.

Book a repair

Ready to book a repair?

Call 065 650 8504 or WhatsApp us with the make, the model and what it is doing. We will tell you when we can come.

The MainTech team in front of the MainTech van
CallWhatsApp